 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AC-DC 45-130 Watts AEH Series * * * * * * * xppower.com Output Voltages from 2.5 V to 48 V Non-standard Outputs Available Universal Input Single & Multiple Output Versions 0 C to +70 C Operating Temperature Efficiency up to 80% Non-standard Connectors Available Specification Input Input Voltage Input Frequency Input Current * 90-264 VAC * 47-63 Hz * 1.5/0.7 A for AEH45, at 115/230 VAC 1.9/1.5 A for AEH80, at 115/230 VAC 3.2/1.7 A for AEH130, at 115/230 VAC Inrush Current * AEH45 & 80: 30 A max at 230 VAC AEH130: 60 A max at 230 VAC cold start Power Factor * EN61000-3-2 class A Earth Leakage Current * <0.5 mA max at 115 VAC/60 Hz <0.75 mA max at 230 VAC/50 Hz General Efficiency Isolation * Up to 80% * 3000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground * 67-83 kHz for AEH45 58 kHz typical for AEH80 53-76 kHz for AEH130 * 100 kHrs per MIL-HDBK-217F Switching Frequency MTBF Environmental Operating Temperature * 0 C to +70 C, derate linearly from 100% load at +40 C to 50% load at +70 C Operating Humidity * 5-95% RH, non-condensing Storage Temperature * -40 C to +85 C Vibration * 2 g on 3 axes Output Output Voltage * See tables. Factory set non-standard voltages available - contact sales Initial Set Accuracy * 5% Start Up Delay * 2 s max Hold Up Time * 16 ms min (>50 ms AEH130) Line Regulation * See note 2 Load Regulation * See note 2 Transient Response * 4% max deviation, recovery to within 1% in 4 ms for a 50% load change Ripple & Noise * 2% pk-pk for outputs 3.3 V 1% pk-pk for all other outputs 20 MHz BW Overvoltage Protection * 112-132% Vnom, auto reset Overload Protection * Output 1 only 110-150% of nominal Temperature * 0.04%/C max Coefficient EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Dips & Interruptions EN55022 level B, conducted and radiated EN61000-3-2, Class A EN61000-3-2 EN61000-4-2, level 2 Perf Criteria A EN61000-4-3, level 3 Perf Criteria A EN61000-4-4, level 2 Perf Criteria A EN61000-4-5, level 3 Perf Criteria A EN61000-4-6, level 2 Perf Criteria A EN61000-4-11 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B * EN60950-1, UL60950-1, CSA C22.2 No. 950 per cUL, CE Mark * * * * * * * * * Safety Approvals AC-DC Models and Ratings Output Power Max 20 26 40 42 45 44 44 44 48 50 50 50 42 42 42 42 42 42 27 40 42 42 42 40 42 42 42 W W W W W W W W W W W W W W W W W W W W W W W W W W W Voltage Nom. 2.5 V 3.3 V 5.0 V 7.0 V 10.0 V 12.0 V 15.0 V 18.0 V 24.0 V 30.0 V 36.0 V 48.0 V +12.0 V +15.0 V +5.0 V +5.0 V +5.0 V +5.0 V +3.3 V +3.3 V +5.0 V +5.0 V +5.0 V +3.3 V +3.3 V +5.0 V +5.0 V Output 1(1,2) Current Min Max 0.0 A 8.0 A 0.0 A 8.0 A 0.0 A 8.0 A 0.0 A 6.0 A 0.0 A 4.5 A 0.0 A 3.7 A 0.0 A 2.9 A 0.0 A 2.4 A 0.0 A 2.0 A 0.0 A 1.7 A 0.0 A 1.4 A 0.0 A 1.0 A 0.5 A 3.0 A 0.5 A 2.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.2 A 0.5 A 5.0 A 0.5 A 5.0 A 0.5 A 5.0 A Voltage Nom. Output 2(1,2) Current Min Max Voltage Nom. AEH45 Output 3(1,2) Current Min Max Model Number AEH45US02 AEH45US03 AEH45US05 AEH45US07 AEH45US10 AEH45US12 AEH45US15 AEH45US18 AEH45US24 AEH45US30 AEH45US36 AEH45US48 AEH45UM21 AEH45UM22 AEH45UM23 AEH45UM26 AEH45UM25 AEH45UM27 AEH45UM28 AEH45UM29 AEH45UM33 AEH45UM31 AEH45UM32 AEH45UM34 AEH45UM35 AEH45UM38 AEH45UM39 -12.0 -15.0 +12.0 +15.0 +24.0 -24.0 +5.0 +12.0 +12.0 +12.0 +15.0 +12.0 +12.0 +24.0 +24.0 V V V V V V V V V V V V V V V 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 A A A A A A A A A A A A A A A 1.0 1.0 2.0 1.5 1.0 1.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.0 1.0 A A A A A A A A A A A A A A A -5.0 -12.0 -15.0 -5.0 -12.0 -12.0 -24.0 V V V V V V V 0.0 0.0 0.0 0.0 0.0 0.0 0.0 A A A A A A A 0.8 0.8 0.8 0.8 0.8 0.8 0.5 A A A A A A A Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation including initial set accuracy, line and load regulation is typically 3% for output 1 and 5% for auxiliaries. Mechanical Details AC Input IEC 320-C14 Inlet 3 5 2 4 1 DC OUTPUT 1.69 (43.0) 2.99 (76.0) 5.75 (146.0) 1.0 PIN CONNECTIONS DUAL TRIPLE Pin SINGLE Shell GND GND GND 1 Common Common Common 2 Common Common Common 3 Output Output 1 Output 1 4 Common Common Output 3 5 Output Output 2 Output 2 DC Output 5 Pin Plug Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) max. 3. Output cable length is 72" (1830mm) approx. 4. Optional output connectors available. Contact sales office. 5. Weight 0.9-1.1 lb (400-500 g) approx. 6. For UK mains lead order part: UK-MAINS-IEC. For European mains lead order part: EU-MAINS-IEC. 7. For mating DIN connector, use standard 5 pin 180 socket. AC-DC Models and Ratings Output Power Max 50 65 70 75 80 80 80 80 80 80 80 60 60 60 60 38 56 65 65 65 63 65 65 65 W W W W W W W W W W W W W W W W W W W W W W W W Voltage Nom. 3.3 V 5.0 V 7.0 V 10.0 V 12.0 V 15.0 V 18.0 V 24.0 V 30.0 V 36.0 V 48.0 V +5.0 V +5.0 V +5.0 V +5.0 V +3.3 V +3.3 V +5.0 V +5.0 V +5.0 V +3.3 V +3.3 V +5.0 V +5.0 V Output 1(1,2) Current Min Max 0.0 A 15.1 A 0.0 A 13.0 A 0.0 A 9.9 A 0.0 A 7.5 A 0.0 A 6.6 A 0.0 A 5.3 A 0.0 A 4.4 A 0.0 A 3.3 A 0.0 A 2.6 A 0.0 A 2.2 A 0.0 A 1.6 A 0.7 A 7.0 A 1.4 A 7.0 A 1.4 A 7.0 A 1.4 A 7.0 A 1.4 A 7.0 A 0.7 A 7.0 A 0.6 A 6.0 A 0.6 A 6.0 A 0.6 A 6.0 A 0.7 A 7.0 A 1.4 A 7.0 A 0.7 A 7.0 A 0.6 A 6.0 A Voltage Nom. Output 2(1,2) Current Min Max Voltage Nom. AEH80 Output 3(1,2) Current Min Max Model Number AEH80US03 AEH80US05 AEH80US07 AEH80US10 AEH80US12 AEH80US15 AEH80US18 AEH80US24 AEH80US30 AEH80US36 AEH80US48 AEH80UM23 AEH80UM26 AEH80UM25 AEH80UM29 AEH80UM28 AEH80UM27 AEH80UM33 AEH80UM31 AEH80UM32 AEH80UM34 AEH80UM37 AEH80UM38 AEH80UM39 +12.0 +15.0 +24.0 -24.0 +5.0 +12.0 +12.0 +12.0 +15.0 +12.0 +12.0 +24.0 +24.0 V V V V V V V V V V V V V 0.3 0.6 0.2 0.2 0.6 0.5 0.3 0.3 0.3 0.6 0.6 0.2 0.2 A A A A A A A A A A A A A 3.0 3.0 2.0 2.0 3.0 3.0 3.0 3.0 2.1 3.0 3.0 2.0 2.0 A A A A A A A A A A A A A -5.0 -12.0 -15.0 -5.0 -12.0 -24.0 -12.0 V V V V V V V 0.0 0.0 0.0 0.0 0.1 0.0 0.0 A A A A A A A 0.8 0.8 0.8 0.8 0.8 0.8 0.8 A A A A A A A Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation including initial set accuracy, line and load regulation is typically 3% for output 1 and 5% for auxiliaries. Mechanical Details AC Input IEC 320-C14 Inlet 1.75 (44.5) 6 8 7 3 4 2 5 3.09 (78.5) 6.61 (167.9) 1.0 DC Output 8 Pin Plug 1 3 5 2 DC Output 5 Pin Plug Pin 1 DC OUTPUT 4 PIN CONNECTIONS SINGLES 03, 05 V 07-48 V GND GND Common Common Common Common Output Output Common Common Output Output Common Output Output DUAL GND Common Output 2 Output 1 Output 2 Output 1 Common Output 1 Common TRIPLE GND Common Output 3 Output 1 Output 2 Output 2 Common Output 1 Output 3 Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) max. 3. Output cable length is 48" (1220mm) approx. 4. Optional output connectors available. Contact sales office. 5. Weight 0.9-1.1 lb (400-500 g) approx. 6. For UK mains lead order part: UK-MAINS-IEC, For European mains lead order part: EU-MAINS-IEC. 7. Optional ON/OFF switch. Add suffix `-S'. Shell 1 2 3 4 5 6 7 8 AC-DC Models and Ratings Output Power Max 90 115 130 130 130 130 130 130 130 130 130 130 90 120 120 120 W W W W W W W W W W W W W W W W Voltage Nom. 3.3 V 5.0 V 7.0 V 9.0 V 12.0 V 15.0 V 18.0 V 24.0 V 28.0 V 36.0 V 48.0 V 54.0 V +3.3 V +5.0 V +5.0 V +5.0 V Output 1(1,2) Current Min Max 0.0 A 27.2 A 0.0 A 23.0 A 0.0 A 18.5 A 0.0 A 14.4 A 0.0 A 10.8 A 0.0 A 8.6 A 0.0 A 7.2 A 0.0 A 5.4 A 0.0 A 4.6 A 0.0 A 3.6 A 0.0 A 2.7 A 0.0 A 2.4 A 4.0 A 20.0 A 4.0 A 20.0 A 4.0 A 20.0 A 4.0 A 20.0 A Total Regulation 7% 7% 7% 5% 5% 5% 5% 5% 5% 5% 3% 3% 10% 7% 7% 7% Voltage Nom. Output 2(1,2) Current Min Max AEH130 Total Regulation Model Number AEH130PS3V3 AEH130PS05 AEH130PS07 AEH130PS09 AEH130PS12 AEH130PS15 AEH130PS18 AEH130PS24 AEH130PS28 AEH130PS36 AEH130PS48 AEH130PS54 AEH130PD01 AEH130PD02 AEH130PD03 AEH130PD04 +12.0 +12.0 +15.0 +24.0 V V V V 0.2 0.2 0.2 0.2 A A A A 2.0 2.0 2.0 2.0 A A A A 5% 5% 5% 5% Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation includes initial set accuracy, line and load regulation. Mechanical Details 6 1 4 8 7 3 2 5 Pin Shell 1 2 3 4 5 6 7 8 PIN CONNECTIONS DUAL SINGLE GND GND Common Common Common Output 2 Output Output 1 Common Output 2 Output Output 1 Common Common Output Output 1 Output Common AC Input IEC 320-C14 Inlet 0.85 (21.5) 1.14 (29.0) 7.71 (196.0) 1.0 3.46 (88.0) Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) max. 3. Output cable length is 48" (1220mm) approx. 4. Optional output connectors available. Contact sales office. 5. Weight 1.9 lb (860 g) approx. 6. For UK mains lead order part: UK-MAINS-IEC, For European mains lead order part: EU-MAINS-IEC. 17-Apr-07 |
Price & Availability of AEH45UM28
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |